MOS36K
MOS36K In-Ceiling Loudspeaker System (EACH)
MOS36K
In-Ceiling Speakers, Minimal Opening
Customised to match the unique appearance of home lighting, the custom finish blends seamlessly into the ceiling alongside lights for a sophisticated uniform look.
The included Trim-Ring Kit includes 6 different designs, offering the latest, invisible flush-mount trim-ring options, and both round & square grilles, allowing the ideal trim to be selected to match any interior.
This full-range system includes a 6.5" subwoofer enclosure hidden in the ceiling, and a 2" mid/high range module for a perfectly balanced sound. Check out this video for more:
REVOLUTIONARY PRE-CONSTRUCTION MOUNTING
Uniquely engineered to grant a simple installation process; built-in rails secure the subwoofer enclosure into the ceiling, with the exact dimensions to ensure a tight fit between ceiling joists; and then a simple twist & hex screw will lock the Mid Range speaker into place.
PREMIUM CHOICE TRIM-RINGS
The included Trim-Ring Kit includes 6 different designs, offering the latest, invisible flushmount trim-ring options, and both round & square grilles, allowing the ideal trim to be selected to match any interior.
| System Type | Two-Way Full Range Loudspeaker |
| Frequency Response | 35Hz – 20kHz [-10dB] 44Hz – 20kHz [+/- 3dB] |
| Power RMS | 75 Watts |
| Power Peak | 200 Watts |
| Recommended Amp | 50W – 150W FTC @ 4 ohm |
| Crossover | Custom Two-Way Passive 200Hz |
| Maximum SPL @ 1m | 102 dB Continuous, 107 dB Peak |
| System coverage | 100-degree conical |
| Sensitivity 1W/1m | 84 dB |
| Nominal Impedance | 4 ohm |
| Input Connectors | 2-pin Phoenix Connector |
| Subwoofer Design | 6.5" Composite Glass Fibre |
| Subwoofer Enclosure | Composite UL Resin |
| Subwoofer Mounting | Overlapping Formed Steel Straps, Adjustable from 14.5" – 22.5" |
| Full-Range Driver Components | - 2" Wide Band Aluminium Cone - Rubber Surround - Neodymium Transducer |
| Data Sheet  |
Install Manual |
Quick Start Guide |
Line Drawings |
| System Type | Two-Way Full Range Loudspeaker |
| Frequency Response | 35Hz – 20kHz [-10dB] 44Hz – 20kHz [+/- 3dB] |
| Power RMS | 75 Watts |
| Power Peak | 200 Watts |
| Recommended Amp | 50W – 150W FTC @ 4 ohm |
| Crossover | Custom Two-Way Passive 200Hz |
| Maximum SPL @ 1m | 102 dB Continuous, 107 dB Peak |
| System coverage | 100-degree conical |
| Sensitivity 1W/1m | 84 dB |
| Nominal Impedance | 4 ohm |
| Input Connectors | 2-pin Phoenix Connector |
| Subwoofer Design | 6.5" Composite Glass Fibre |
| Subwoofer Enclosure | Composite UL Resin |
| Subwoofer Mounting | Overlapping Formed Steel Straps, Adjustable from 14.5" – 22.5" |
| Full-Range Driver Components | - 2" Wide Band Aluminium Cone - Rubber Surround - Neodymium Transducer |
