6.5" Single Stereo / Surround In-Ceiling Speaker

This excellent performer features a dual voice coil equipped version of the CS610 woofer and a pair of aluminium dome tweeters. This versatile speaker allows stereo sound in small spaces like bathrooms and hallways, and can also be used as surround effects speakers in home theatres.
The tweeter array can be rotated after installation to get the best high frequency coverage, and like the CS650 there is a tweeter and woofer level control for final adjustment. Because there are two discrete channels, these can be wired as bipole, dipole, or even as surround rears in a 7.1 theatre!

The PSB Custom range of architectural speakers embody over 40 years of cutting edge research in the field of acoustics and loudspeaker design. Musical, refined, and nearly invisible, these speakers can create a beautiful ambience, even in larger spaces. Because their sonic signature is identical to other PSB speakers, they can integrate perfectly as part of home theatres or as the soundtrack of the connected home. Since PSB has in-room, on-wall, outdoor, in-wall and in-ceiling designs at many different price points, it makes it easy to specify an audio system that you know will turn out right, be easy to specify and install, and will absolutely thrill even your most discriminating clients.

Adaptable to your decor

The CS630 includes both square and round magnetic grilles. Choose the one that best fits your room — it's a breeze to attach.

The grilles are paintable, so you can match them to your room's decor. The zero-bezel edge means no bulk around the sides of the grille, making it virtually disappear into your ceiling.
 

 

Product highlights:

  • Stereo-input design plays both channels of a stereo signal through a single speaker
  • Perfect for a bathroom, kitchen, or hallway where you want stereo sound from a single hideaway speaker
  • Two 0.75mm aluminum dome tweeters
    • Tweeter module can be rotated to direct sound towards you for better high-frequency detail
    • Built-in dual-position switch lets you adjust the tweeter output levels
  • 6.5" carbon-filled polypropylene woofer
    • Built-in dual-position switch lets you adjust the woofer output level
  • Frequency response: 50-20,000 Hz (±3 dB)
  • Recommended amplifier power: 10-100 watts
  • Sensitivity: 88 dB
  • Impedance: 8 ohms
  • Includes both round and square magnetic paintable grilles
  • Speaker cutout diameter: 212mm
  • Circular grille diameter: 240mm
  • Square grille dimensions: 240mm x 240mm
  • Mounting depth: 114mm

 

CustomSound Series: PSB's CustomSound series of high performance architectural loudspeakers offer superior stereo and home theatre sound in residential and commercial applications. Designed inside the anechoic chamber at Canada's National Research Council, the CustomSound series speakers are engineered with PSB's unparallel driver technology and expertise.

Stereo or Home Theatre Applications: This versatile speaker allows stereo sound in small spaces like bathrooms and hallways, and can also be used as surround effects speakers in home theatres. Because there are two discrete channels, it can be wired as bipole, dipole, or even as surround plus surround back speakers in a 7.1 theatre application.

6.5" Carbon-Filled Polypropylene Woofer: Featuring PSB's trademark carbon-filled polypropylene 6.5" woofer with rubber surround, this speaker has a warm and balanced sound with plenty of power handling thanks to the high temperature voice coil.

Dual 0.75" Aluminium Dome Tweeters: Two 0.75" aluminium dome tweeters are concentrically mounted and feature a carefully engineered Wave Guides. The tweeter array can be rotated after installation to get the best high frequency coverage.

Tweeter & Woofer Level: Adjustment for the level of the tweeter array and woofer allow you to "dial-in" the best blend of high and low frequency response for the speaker and its acoustic environment after installation to achieve the most musical balance for every room. The tweeter and woofer level switches are located on the front of the speaker and can be set to +3dB or 0dB.

Precision Crossover Network: The PSB CustomSound series in-ceiling loudspeaker utilises a precision crossover network between the woofer and concentrically mounted tweeter array for a smooth wide-band response.

Spring-Post Terminals: The PSB CustomSound series in-ceiling speaker is outfitted with two sets of spring-post terminals to connect your speaker wire. The spring-post terminals will accept bare wire (up to 12AWG), pin-connectors, and banana-plugs (single only).

In-Ceiling Installation: The CustomSound series in-ceiling loudspeaker features a slim and discrete profile that practically disappears in the room thanks to its low-profile perforated grille and frameless design, making the speaker easy to install and conceal in all types of rooms. The in-ceiling speaker employs four high strength doglegs for easy installation and removal. In part to their wide dispersion characteristics and other aspects of their superb sonic performance, mounting position in your room is very flexible.

Paintable Steel Grille (Round & Square): The CustomSound series in-ceiling speaker comes with both round and square magnetic frameless grilles. The grilles use high-strength magnets for easy installation of the grilles to the speaker. The grille is constructed of painted steel and can be re-painted to match your ceiling following standard painting practices and techniques (spraying, not rolling or brushing, will yield best results).

CS630
Data Sheet

pdf-icon-843-498
CS630
Manual

pdf-icon-843-498
CS630
Quick Start Guide

pdf-icon-843-498


  

 
CustomSound Series: PSB's CustomSound series of high performance architectural loudspeakers offer superior stereo and home theatre sound in residential and commercial applications. Designed inside the anechoic chamber at Canada's National Research Council, the CustomSound series speakers are engineered with PSB's unparallel driver technology and expertise.

Stereo or Home Theatre Applications: This versatile speaker allows stereo sound in small spaces like bathrooms and hallways, and can also be used as surround effects speakers in home theatres. Because there are two discrete channels, it can be wired as bipole, dipole, or even as surround plus surround back speakers in a 7.1 theatre application.

6.5" Carbon-Filled Polypropylene Woofer: Featuring PSB's trademark carbon-filled polypropylene 6.5" woofer with rubber surround, this speaker has a warm and balanced sound with plenty of power handling thanks to the high temperature voice coil.

Dual 0.75" Aluminium Dome Tweeters: Two 0.75" aluminium dome tweeters are concentrically mounted and feature a carefully engineered Wave Guides. The tweeter array can be rotated after installation to get the best high frequency coverage.

Tweeter & Woofer Level: Adjustment for the level of the tweeter array and woofer allow you to "dial-in" the best blend of high and low frequency response for the speaker and its acoustic environment after installation to achieve the most musical balance for every room. The tweeter and woofer level switches are located on the front of the speaker and can be set to +3dB or 0dB.

Precision Crossover Network: The PSB CustomSound series in-ceiling loudspeaker utilises a precision crossover network between the woofer and concentrically mounted tweeter array for a smooth wide-band response.

Spring-Post Terminals: The PSB CustomSound series in-ceiling speaker is outfitted with two sets of spring-post terminals to connect your speaker wire. The spring-post terminals will accept bare wire (up to 12AWG), pin-connectors, and banana-plugs (single only).

In-Ceiling Installation: The CustomSound series in-ceiling loudspeaker features a slim and discrete profile that practically disappears in the room thanks to its low-profile perforated grille and frameless design, making the speaker easy to install and conceal in all types of rooms. The in-ceiling speaker employs four high strength doglegs for easy installation and removal. In part to their wide dispersion characteristics and other aspects of their superb sonic performance, mounting position in your room is very flexible.

Paintable Steel Grille (Round & Square): The CustomSound series in-ceiling speaker comes with both round and square magnetic frameless grilles. The grilles use high-strength magnets for easy installation of the grilles to the speaker. The grille is constructed of painted steel and can be re-painted to match your ceiling following standard painting practices and techniques (spraying, not rolling or brushing, will yield best results).

Questions?

In order to assist us in reducing spam, please type the characters you see:

You may also like

CS610

CS610

CS605

CS605

CS650

CS650

CS805

CS805