CS610
PSB Custom Series CS610 (EACH)
CS610
PSB Speakers, In-Ceiling Speakers, In-Ceiling Speakers
Two-Way 6.5" Performance In-Ceiling Speaker
This premium architectural speaker embodies over 40 years of cutting-edge research in the field of acoustics and loudspeaker design. Musical, refined, and nearly invisible, these speakers can create a beautiful ambience, even in larger spaces. Because their sonic signature is identical to other PSB speakers, the CS610 can integrate perfectly as part of home theatres or as the soundtrack of the connected home.
Featuring PSB’s trademark carbon-filled polypropylene 6.5” woofer, this speaker has a warm and balanced sound with plenty of power handling thanks to the high temperature voice coil. The 3/4” aluminium dome tweeter, another proprietary PSB driver, is concentrically mounted and features a carefully engineered Wave Guide and ball-joint pivot mount assembly. This allows the tweeter to go lower in frequency, creating a perfect blend with the woofer in the crossover region, and allows the tweeter to be aimed toward the listening position for enhanced musical imaging. Adjustment for the level of the tweeter allows you to ‘dial in’ the upper frequency response of the speaker and its acoustic environment after installation to achieve the most musical balance for every room.
Adaptable to your decor
The CS610 has frameless magnetic grilles with invisible scrims. Both round and square grilles are provided, simplifying and reducing your inventory requirements. Each model features an improved simple, foolproof mounting system using heavy duty doglegs. Cutting templates are included. Pre-construction brackets and backcans are also available.
Product highlights:
- Ideal for an in-ceiling music system or overhead surround effects in a home theater system
- 0.75" aluminum dome tweeter
- Tweeter is aimable — direct it towards you for better high-frequency detail
- Built-in dual-position switch lets you adjust the output level
- 6.5" carbon-filled woofer
- Frequency response: 50-20,000 Hz (±3 dB)
- Recommended amplifier power: 10-100 watts
- Sensitivity: 88 dB
- Impedance: 8 ohms
- Includes both round and square magnetic paintable grilles
- Speaker cutout diameter: 212mm
- Circular grille diameter: 240mm
- Square grille dimensions: 240mm x 240mm
- Mounting depth: 114mm
6.5" Carbon-Filled Polypropylene Woofer: Featuring PSB's trademark carbon-filled polypropylene 6.5" woofer with rubber surround, this speaker has a warm and balanced sound with plenty of power handling thanks to the high temperature voice coil.
Aimable 0.75" Aluminium Dome Tweeter: The 0.75" aluminium dome tweeter, another proprietary PSB driver, is concentrically mounted and features a carefully engineered Wave Guide and ball-joint pivot mount assembly. This allows the tweeter to go lower in frequency, creating a perfect blend with the woofer in the crossover region, and allows the tweeter to be aimed toward the listening position for enhanced musical imaging.
Tweeter Level: Adjustment for the level of the tweeter allows you to "dial-in" the upper frequency response of the speaker and its acoustic environment after installation to achieve the most musical balance for every room. The tweeter level switch is found on the front of the speaker and can be set to +3dB or 0dB.
Precision Crossover Network: The PSB CustomSound series in-ceiling loudspeaker utilises a precision crossover network between the woofer and concentrically mounted tweeter for a smooth wide-band response.
Spring-Post Terminals: The PSB CustomSound series in-ceiling speaker is outfitted with spring-post terminals to connect your speaker wire. The spring-post terminals will accept bare wire (up to 12AWG), pin-connectors, and banana-plugs (single only).
In-Ceiling Installation: The CustomSound series in-ceiling loudspeaker features a slim and discrete profile that practically disappears in the room thanks to its low-profile perforated grille and frameless design, making the speaker easy to install and conceal in all types of rooms. The in-ceiling speaker employs four high strength doglegs for easy installation and removal. In part to their wide dispersion characteristics and other aspects of their superb sonic performance, mounting position in your room is very flexible.
Paintable Steel Grille (Round & Square): The CustomSound series in-ceiling speaker comes with both round and square magnetic frameless grilles. The grilles use high-strength magnets for easy installation of the grilles to the speaker. The grille is constructed of painted steel and can be re-painted to match your ceiling following standard painting practices and techniques (spraying, not rolling or brushing, will yield best results).
| CS610 Data Sheet  |
CS610 Manual |
CS610 Quick Start Guide |
6.5" Carbon-Filled Polypropylene Woofer: Featuring PSB's trademark carbon-filled polypropylene 6.5" woofer with rubber surround, this speaker has a warm and balanced sound with plenty of power handling thanks to the high temperature voice coil.
Aimable 0.75" Aluminium Dome Tweeter: The 0.75" aluminium dome tweeter, another proprietary PSB driver, is concentrically mounted and features a carefully engineered Wave Guide and ball-joint pivot mount assembly. This allows the tweeter to go lower in frequency, creating a perfect blend with the woofer in the crossover region, and allows the tweeter to be aimed toward the listening position for enhanced musical imaging.
Tweeter Level: Adjustment for the level of the tweeter allows you to "dial-in" the upper frequency response of the speaker and its acoustic environment after installation to achieve the most musical balance for every room. The tweeter level switch is found on the front of the speaker and can be set to +3dB or 0dB.
Precision Crossover Network: The PSB CustomSound series in-ceiling loudspeaker utilises a precision crossover network between the woofer and concentrically mounted tweeter for a smooth wide-band response.
Spring-Post Terminals: The PSB CustomSound series in-ceiling speaker is outfitted with spring-post terminals to connect your speaker wire. The spring-post terminals will accept bare wire (up to 12AWG), pin-connectors, and banana-plugs (single only).
In-Ceiling Installation: The CustomSound series in-ceiling loudspeaker features a slim and discrete profile that practically disappears in the room thanks to its low-profile perforated grille and frameless design, making the speaker easy to install and conceal in all types of rooms. The in-ceiling speaker employs four high strength doglegs for easy installation and removal. In part to their wide dispersion characteristics and other aspects of their superb sonic performance, mounting position in your room is very flexible.
Paintable Steel Grille (Round & Square): The CustomSound series in-ceiling speaker comes with both round and square magnetic frameless grilles. The grilles use high-strength magnets for easy installation of the grilles to the speaker. The grille is constructed of painted steel and can be re-painted to match your ceiling following standard painting practices and techniques (spraying, not rolling or brushing, will yield best results).
