KX2
2.4 Colour In-wall Universal System Controller (White faceplate with black bezel)
KX2
Touchpanels & Keypads, In-Wall Controllers
The KX2 in-wall controller has a clean, sleek design with twelve programmable hard buttons and a 2.8" colour touchscreen. The hard buttons and graphic interface are fully programmable using RTI's Integration Designer® software for full control of electronics throughout the building. A built-in infrared output port allows direct control or get two-way control when used with an RTI XP series control processor. In addition, the unit's integrated 10/100Base-T Ethernet port with Power-over-Ethernet (POE) provides the flexibility to accommodate any installation.
*Feedback requires a compatible two-way RTI control processor.
*Integration Designer software only available to authorised RTI dealers
- Fully programmable 2.8" touchscreen display and twelve hard buttons.
- QVGA resolution (240w x 320h) TFT LCD to display custom buttons, text and graphics.
- Integrated 10/100Base-T Ethernet port with Power-over-Ethernet.
- IR output drives up to 1000 feet of wire.
- Proximity sensor automatically wakes the unit up when approached by the user and an ambient light sensor adjusts the brightness.
- Integrated mounting wings for easy installation in retrofit installs.
- Fits in a 4"x4" square electrical junction box (See installation guide for important information).**
- Ships with stylish, low-profile white bezel - bezels also available in black and light almond.
- Faceplate and buttons are black with a glossy finish.
- Twelve hard buttons may be interchanged and custom laser engraved using Laser Shark.
- Optional modules/processors for voltage sensing, relays and advanced two-way control.
- USB and Ethernet programming.
| Power | +9VDC to +16VDC, 1A max |
| Power Management | Adjustable backlight brightness, Ambient light sensor, Proximity sensor |
| Touchscreen Display | High-brightness color TFT LCD QVGA (240w x 320h pixels) with 65K colors Integrated high-resolution resistive touchscreen |
| Display Size | 2.8" (71mm) diagonal |
| Display Backlight | LED Backlit, 200nit |
| Infrared Output | Through control port, 200mA output Drives up to 1000 ft (300 m) of wire |
| Ethernet Port | 10/100 Base-T with Power-over-Ethernet |
| Audio | Beeper |
| Operating Temperature | +32°F to +122°F (0°C to +50°C) |
| Operating Humidity | 5% to 95% Non-condensing |
| Total System Memory | 32MBytes Flash (non-volatile) memory |
| Device Capability | Total number of devices is limited only by memory |
| Macro Capability | Unlimited steps in a single macro Total number of macros is limited only by memory Macro capability on every button |
| Communications | USB programming port |
| Enclosure | High-impact molded ABS plastic |
| Mounting | Integrated mounting wings, or screws through front bezel |
| Front Plate Dimensions (H x W) | 4.4 in (112mm) x 4.6 in (117mm) |
| Installation Cut-Out (H x W) | 3.789” in (96.5mm) x 3.789” in (96.5mm) |
| Total Depth in Wall | 1.2 in (31mm) Plus cables |
| Weight | 7.5 oz (212g) |
* All Specifications subject to change without notice.
** The KX2 uses a standard 4”x 4” electrical junction box. These should be available at most hardware stores or electrical supply stores online (ex. Granger.com).
| Power | +9VDC to +16VDC, 1A max |
| Power Management | Adjustable backlight brightness, Ambient light sensor, Proximity sensor |
| Touchscreen Display | High-brightness color TFT LCD QVGA (240w x 320h pixels) with 65K colors Integrated high-resolution resistive touchscreen |
| Display Size | 2.8" (71mm) diagonal |
| Display Backlight | LED Backlit, 200nit |
| Infrared Output | Through control port, 200mA output Drives up to 1000 ft (300 m) of wire |
| Ethernet Port | 10/100 Base-T with Power-over-Ethernet |
| Audio | Beeper |
| Operating Temperature | +32°F to +122°F (0°C to +50°C) |
| Operating Humidity | 5% to 95% Non-condensing |
| Total System Memory | 32MBytes Flash (non-volatile) memory |
| Device Capability | Total number of devices is limited only by memory |
| Macro Capability | Unlimited steps in a single macro Total number of macros is limited only by memory Macro capability on every button |
| Communications | USB programming port |
| Enclosure | High-impact molded ABS plastic |
| Mounting | Integrated mounting wings, or screws through front bezel |
| Front Plate Dimensions (H x W) | 4.4 in (112mm) x 4.6 in (117mm) |
| Installation Cut-Out (H x W) | 3.789” in (96.5mm) x 3.789” in (96.5mm) |
| Total Depth in Wall | 1.2 in (31mm) Plus cables |
| Weight | 7.5 oz (212g) |
* All Specifications subject to change without notice.
** The KX2 uses a standard 4”x 4” electrical junction box. These should be available at most hardware stores or electrical supply stores online (ex. Granger.com).
