The ZM-24 2.4GHz Zigbee® Transceiver Module provides bi-directional communication between two-way enabled RTI remote controls and control processors utilizing Zigbee® wireless communication. Capable of being hard-wired directly to a control processor or be used as a wireless repeater device to create an ultra-reliable, self-healing Zigbee network.

 

* The ZM-24 does not directly control A/V components. It must be used in conjunction with a Zigbee® enabled processor.

Utilizing the latest in wireless technology, the ZM-24 Transceiver Module is capable of more than just receiving signals - it can transmit signals as well. This creates a bi-directional communication link between Zigbee® enabled RTI control processors and handheld remote controls. Feedback, such as song meta-data or volume level from supported devices can now be viewed on the remote control.

The ZM-24 is easy to install, since only one module needs to be hard-wired to the control processor. Additional “repeater” modules can be added by simply powering them from any electrical outlet within communication range of other modules. The ZM-24 units will then create a self-healing “mesh” network which adapts to changes or problems with the communication path.

NOTE: A 2.4 GHz Zigbee® enabled remote control and processor must be used with this model of transceiver. It is not compatible with the 433MHz remote controls.

  • Enables bi-directional Zigbee® communication.
  • Wireless Zigbee® communication range between ZM-24 modules up to 100 feet.
  • Connects to a central processor from up to 1000 feet away using standard Cat5 cable.
  • Create a self-healing mesh network by adding modules configured in “repeater” mode.
  • Utilizes IEEE802.15.4 wireless Zigbee® communication at 2.4Ghz.
  • Durable plastic enclosure and adjustable antenna.
  • Receives power from an RTI control processor or from the included power supply.
  • Durable plastic enclosure and adjustable antenna.
  • Easy mounting with a detachable wall bracket.
Power Requirements +9VDC to +16VDC @ 60mA
RTI COM Port Two-way Zigbee® Communication Port, RJ45 Connection
Drives up to 1000 ft (300 m) of wire.
Wireless Networking IEEE802.15.4 Zigbee© network compliant
RF Carrier Frequency 2.4Ghz - 2.5Ghz
Operating Temperature +32°F to +122°F
(0°C to +50°C)
Operating Humidity 5% to 95% non-condensing
Device Capability Total number of devices is limited only by memory
Communications OTA (Over-the-air) Programmable
Enclosure High-impact molded ABS plastic, black
Mounting Detachable bracket
Module Dimensions -
Antenna Extended
3.5" x 7.5 " x 1.1"
(89mm x 184mm x 28mm)
Weight 4.4 oz. (125 grams)

* All specifications subject to change without notice.

ZM-24 cutsheet.pdf
  • Enables bi-directional Zigbee® communication.
  • Wireless Zigbee® communication range between ZM-24 modules up to 100 feet.
  • Connects to a central processor from up to 1000 feet away using standard Cat5 cable.
  • Create a self-healing mesh network by adding modules configured in “repeater” mode.
  • Utilizes IEEE802.15.4 wireless Zigbee® communication at 2.4Ghz.
  • Durable plastic enclosure and adjustable antenna.
  • Receives power from an RTI control processor or from the included power supply.
  • Durable plastic enclosure and adjustable antenna.
  • Easy mounting with a detachable wall bracket.

Questions?

In order to assist us in reducing spam, please type the characters you see:

You may also like

CPB-1

CPB-1

PCM-4

PCM-4

ESC-2+

ESC-2+

RSO-1

RSO-1