RCM-4
Ethernet enabled Relay Control Module
RCM-4
Accessories
The RCM-4 is equipped with four individually addressable relays. Built-in Ethernet enables the convenience of control from an RTI XP series control processor via the LAN. An IR input allows the RCM-4 to be triggered from many different sources, including RTI in-wall controllers, control processors or third-party infrared repeater systems. Commands trigger open and close functions as well as adjustable hold times for momentary relay operation. The RCM-4 can be powered from the included power supply or PoE.
- Four individually addressable relays.
- Relays capable of switching up to 28VDC@5A.
- Relays can be used in a normally open or normally closed configuration.
- Relays can be controlled with both IR and Ethernet.
- Powered using power supply or PoE (Power over Ethernet).
- Discrete set of IR codes and an IR input allows relays to be triggered from virtually any IR programmable system.
- Relays create a “dry contact”.
- Programmable momentary relay hold times.
- Sturdy steel construction.
- 12VDC power supply included.
| Power | +12VDC, 1.25A |
| Relays | Four, 28 VDC@5A |
| Ethernet Port | One, RJ-45, 10/100 Base-T with Power-over-Ethernet |
| Infrared Input | Compatible with industry-standard repeaters and receivers |
| USB Port | One, Programming |
| Enclosure | Formed steel, black powder coating |
| Mounting | Wall-mount or free standing |
| Dimensions (W x H x D) | 6.8” (173mm) x 2.9” (74mm) x 1.2” (31mm) |
| Weight | 1 lb. (466g) |
| Power | +12VDC, 1.25A |
| Relays | Four, 28 VDC@5A |
| Ethernet Port | One, RJ-45, 10/100 Base-T with Power-over-Ethernet |
| Infrared Input | Compatible with industry-standard repeaters and receivers |
| USB Port | One, Programming |
| Enclosure | Formed steel, black powder coating |
| Mounting | Wall-mount or free standing |
| Dimensions (W x H x D) | 6.8” (173mm) x 2.9” (74mm) x 1.2” (31mm) |
| Weight | 1 lb. (466g) |
