MHUBS888100A
Stackable 8x8+8 HDMI Matrix 4K 100m System
MHUBS888100A
HDANYWHERE, HDMI Matrix, AV Solutions for 5+ Rooms, AV Matrix Switchers
A stackable matrix.
Be the master of impressive AV arrays throughout large homes and venues.
MHUB-S makes big AV projects up to 80 zones efficient and easy to deploy.
Supporting 100m range for full-fat 4K, with uControl operating system included, there's finally an alternative to AV over IP.
Shun complexity with simplicity.
The MHUB-S is a compelling alternative to AV over IP that's simple to install.
It's plug and play, with everything built right in for you already.
Your time is important. A project may involve the procurement of hardware, infrastructure, control and installation. This takes time and effort. MHUB-S provides everything you need inside the box - including 8x powered HDBT receivers and rack mounting hardware.
Stack your way to success.
MHUB-S systems are quick to install and simple to deploy. You can choose to operate one as a standalone system, or stack additional MHUB-S systems to handle larger projects of 16, 24, 32, 48, 64 or even 80 screens (you get the idea!).
Up to 50% cheaper.
If your project has less than 80 screens, then MHUB-S offers exceptional value for money compared with other methods of distribution because there's no requirement for an expensive managed switch, and control is included.
Check out how MHUB-S stacks up against competing distribution solutions:
[*] Up to 80 screens with the MHUBS888100A, or 160 screens with the bigger brother MHUBS161616100A
How does it work?
Mirrors enable easy stacking.
MHUB-S can work standalone as a 100m 4K 8x8 system, or it can be stacked with additional MHUB-S units by mirroring the inputs. Every output operates discretely, and can select any source input from the foundation unit.
MHUB-S even supports IR passback. A source device connected to the foundation system can receive an IR signal from MHUB-S systems higher up in the stack.
Click here for the MHUB-S stacking guide for more information.
Free uControl platform included.
|
Control everything connected to MHUB S with the uControl app**. With video distribution delivered by MHUB S, there's no need to spec a control system if you (or your customer) doesn't want to. Instead, control the entire system from the app** - whether it's turning off all displays, switching to certain combinations, or scheduling Sequences so that displays turn on at a certain time on weekdays. Control lighting scenes from Rako and Hue New to uControl is the ability to add IP connections to lighting systems from Hue and Rako. Control lighting scenes from directly within uControl. |
 |
[**] Note: uControl app available for Apple iOS only (Android is no longer supported).
Click here for more information about uControl
uControl Remote Ready!
uControl your smart home tech with one remote. Navigate endless entertainment and scene-setting options, with a unifying remote for all media, music and mood control. Check it out here!
Seamlessly integrates with other automation systems
Use any third-party control system of choice with MHUB S to integrate it in to a broader
automation system with drivers from leading manufacturers available here.
Features
| Stackable to 80+ Zones (x10 MHUB-S) with uControl |
| Auto or selectable downscaling on all outputs |
| Multi-channel digital audio support up to and including Dolby/Atmos and DTS:X |
| HDMI Output Mirrors (x2) for AVRs |
| Video source or zone audio extraction modes |
| analogue and Optical audio extraction on all outputs (not downmixed) |
| Line-level (Pre-Out) analogue volume control |
| Adjustable output gain from -12dBu to +12dBu in 1dB steps |
| Bi-directional IR |
| Source Stacking IR (Pass IR from one MHUB system to the next) |
| Expanded IO capability (API pass-through of IR and RS232 data) |
| CEC Display control*** |
| uControl, Apple Watch***, IP*** & Amazon Alexa compatible |
| Remotely monitorable |
| Works with uControl™ Remote |
*** Not available in Standalone. Requires Zone Processor.
Specification
| Form factor | 2U Rackmountable |
| Inputs / Mirrors / Outputs | (x8) HDMI Inputs / (x8) HDMI Input Mirrors, (x8) Toslink Optical, (x8) 3.5mm Stereo Jack / (x2) HDBaseT + HDMI Outputs, (x6) HDBaseT Outputs |
| Video bandwidth | HDMI backplane 594MHz clock / 18Gbps data HDBT 340MHz clock / 10.2Gbps data |
| ESD protection | ± 8kV (air-gap discharge) ± 4kV (contact discharge) |
| Hub control | Web GUI, IR, TCP/IP, RS232, App, Alexa |
| App control | Full control over sources, matrix hub & display functions. |
| Device weight | Chassis: 2400g Receiver: 187g |
| Package weight | 4100g |
| Dimensions (W/D/H) | Hub 440 / 362 / 88mm (without feet) RX 162.8 / 90 / 18mm |
| Operating temperature | 32°F to 104°F (0°C to 40°C) |
| Storage temperature | -4°F to 140°F (-20°C to 60°C) |
| Relative humidity | 20~90 % RH (non-condensing) |
| Power consumption | 101W (max) tbcW (standby) |
| Guarantee | 2/5-year guarantee (Cloud registration required) |
| MHUB-S Data Sheet  |
MHUB-S Installer Manual |
MHUB-S Stacking Guide |
Specification
| Form factor | 2U Rackmountable |
| Inputs / Mirrors / Outputs | (x8) HDMI Inputs / (x8) HDMI Input Mirrors, (x8) Toslink Optical, (x8) 3.5mm Stereo Jack / (x2) HDBaseT + HDMI Outputs, (x6) HDBaseT Outputs |
| Video bandwidth | HDMI backplane 594MHz clock / 18Gbps data HDBT 340MHz clock / 10.2Gbps data |
| ESD protection | ± 8kV (air-gap discharge) ± 4kV (contact discharge) |
| Hub control | Web GUI, IR, TCP/IP, RS232, App, Alexa |
| App control | Full control over sources, matrix hub & display functions. |
| Device weight | Chassis: 2400g Receiver: 187g |
| Package weight | 4100g |
| Dimensions (W/D/H) | Hub 440 / 362 / 88mm (without feet) RX 162.8 / 90 / 18mm |
| Operating temperature | 32°F to 104°F (0°C to 40°C) |
| Storage temperature | -4°F to 140°F (-20°C to 60°C) |
| Relative humidity | 20~90 % RH (non-condensing) |
| Power consumption | 101W (max) tbcW (standby) |
| Guarantee | 2/5-year guarantee (Cloud registration required) |
