IMAGINE X1T
PSB Imagine X1T Tower Speaker (EACH)
IMAGINE X1T BLK
PSB Speakers, Tower Speakers, Tower Speakers
Modest size, monumental performance
A deceptively thin and discreet floor standing speaker, the Imagine X1T has wide bandwidth and high SPL output capabilities that defy its small size. A seamless blend of design and hifi performance, the X1T is able to meet the demands of your multi-channel, or stereo setup. Capable, energetic and attractively priced, these speakers pack a mighty punch.
- 200 watts input power
- 1” (25mm) titanium dome with ferrofluid neodymium magnet
- 2 x 5¼” (133mm) clay/ceramic reinforced injection moulded polypropylene cone woofers
- Bass reflex (ported) design
- Two sets of gold-plated five way binding posts can be bi-wired or bi-amped
- Black ash vinyl finish
Bring your space to life
Placement throughout the home is effortless thanks to the smart, minimalist design of these speakers and their small footprint. As the smallest floorstanders in the Imagine X Speaker line up, the X1T’s can be easily incorporated into your space. Their modest size combined with a handsome cabinet design will suit any room and compliment many different system setups without any added clutter.
Product highlights:
- Frequency response: 35-23,000 Hz (±3dB)
- Sensitivity: 90 dB
- Impedance: 8 ohms
- Recommended power: 20-200 watts
- 1" titanium dome tweeter with neodymium magnets
- Dual 5.25" clay ceramic-filled polypropylene woofers
- Bass reflex (ported) design
- Two sets of gold-plated five way binding posts — can be bi-wired or bi-amped
- Black ash vinyl finish
- Weight: 17.3 kg each
- (W x H x D) 208 x 874 x 395mm each
- 1" Tweeter: The PSB Imagine X1T features a 1" titanium dome tweeter with ferrofluid and a neodymium magnet structure for extended high frequency response that remains distortion free even at extreme volume levels.
- 5.25" Woofers: The PSB Imagine X1T houses two 5.25" proprietary injection-moulded clay/ceramic reinforced polypropylene cones with rubber surrounds that have been refined to improve stiffness, internal damping, and low mass. By optimising the control and performance, the PSB engineering team was able to reduce the complexity of the crossover design.
Bass Reflex Cabinet: The Imagine X1T floor-standing speaker utilises a bass reflex enclosure with a front-firing port for greater efficiency and bigger bass response. The cabinet's front baffle is made from 32mm" thick MDF and is extremely rigid to prevent unwanted distortion and vibration. A black ash wood-grain finish complements the crisp, clean lines, and slim cabinet to integrate seamlessly with almost any decor.
Dual Binding Posts: The Imagine X1T floor-standing speaker features dual 5-way, gold-plated binding posts that can accept bare wire (up to 8AWG), spade-lugs, pin-connectors, and banana plugs (single or dual). The two sets of binding posts are shorted together by a gold-plated jumper. With the jumper removed the Imagine X1T can be bi-wired or bi-amplified.
NRC (Nation Research Council): Through many years of research at the National Research Council (NRC) in Canada, home to one of the world's most advanced acoustical laboratories, PSB's design team has learned not only what people love to hear, but also how they hear it in a room. Critical to the Imagine X series design is this research into human perception of sound using double-blind listening tests. Double-blind testing removes any listener bias to give us the most accurate test result. It allows PSB to understand what is most important to listeners and allows us to create the ideal blend of performance and price for every application. In 1974, PSB was the first company to use the NRC for loudspeaker development and remains the most active user of the facility today. PSB's experience with the NRC, how they interpret the data and implement it into the design of the Imagine X series speakers, gives PSB a real advantage in speaker design.Rubber & Spiked Feet: The PSB Imagine X1T floor-standing speaker comes with four rubber feet and four spiked feet. The rubber feet should be used on hardwood and tiles floors, while the spikes should be used on carpeted flooring. The feet thread into the bottom of the speaker and are adjustable to level the speaker up with your floors. The rubber feet add approximately 10mm to the height of the speaker, while the spiked feet add approximately 25mm to the height of the speaker.
Applications: All PSB's Imagine X series speakers are carefully matched in timbre, giving you flexibility to combine any of the models to work together in many different rooms and system setups; from a simple stereo application to a complex home theatre system.
| IMAGINE X1T Data Sheet  |
IMAGINE X1T Manual |
- 1" Tweeter: The PSB Imagine X1T features a 1" titanium dome tweeter with ferrofluid and a neodymium magnet structure for extended high frequency response that remains distortion free even at extreme volume levels.
- 5.25" Woofers: The PSB Imagine X1T houses two 5.25" proprietary injection-moulded clay/ceramic reinforced polypropylene cones with rubber surrounds that have been refined to improve stiffness, internal damping, and low mass. By optimising the control and performance, the PSB engineering team was able to reduce the complexity of the crossover design.
Bass Reflex Cabinet: The Imagine X1T floor-standing speaker utilises a bass reflex enclosure with a front-firing port for greater efficiency and bigger bass response. The cabinet's front baffle is made from 32mm" thick MDF and is extremely rigid to prevent unwanted distortion and vibration. A black ash wood-grain finish complements the crisp, clean lines, and slim cabinet to integrate seamlessly with almost any decor.
Dual Binding Posts: The Imagine X1T floor-standing speaker features dual 5-way, gold-plated binding posts that can accept bare wire (up to 8AWG), spade-lugs, pin-connectors, and banana plugs (single or dual). The two sets of binding posts are shorted together by a gold-plated jumper. With the jumper removed the Imagine X1T can be bi-wired or bi-amplified.
NRC (Nation Research Council): Through many years of research at the National Research Council (NRC) in Canada, home to one of the world's most advanced acoustical laboratories, PSB's design team has learned not only what people love to hear, but also how they hear it in a room. Critical to the Imagine X series design is this research into human perception of sound using double-blind listening tests. Double-blind testing removes any listener bias to give us the most accurate test result. It allows PSB to understand what is most important to listeners and allows us to create the ideal blend of performance and price for every application. In 1974, PSB was the first company to use the NRC for loudspeaker development and remains the most active user of the facility today. PSB's experience with the NRC, how they interpret the data and implement it into the design of the Imagine X series speakers, gives PSB a real advantage in speaker design.Rubber & Spiked Feet: The PSB Imagine X1T floor-standing speaker comes with four rubber feet and four spiked feet. The rubber feet should be used on hardwood and tiles floors, while the spikes should be used on carpeted flooring. The feet thread into the bottom of the speaker and are adjustable to level the speaker up with your floors. The rubber feet add approximately 10mm to the height of the speaker, while the spiked feet add approximately 25mm to the height of the speaker.
Applications: All PSB's Imagine X series speakers are carefully matched in timbre, giving you flexibility to combine any of the models to work together in many different rooms and system setups; from a simple stereo application to a complex home theatre system.
