SUBDD12
Deep Series Dual 12" Powered Subwoofer
SUBDD12
Deep & Performance (Active), Subwoofers
Overview
The Deep Subwoofer Collection from Origin Acoustics presents refined, subdued aesthetics coupled with surprisingly powerful low-frequency reproduction. With four available models, an appropriate power level can be selected for any room or configuration. The easy set knobs put control back in your hands, and the 5v USB port powers most modern wireless receivers.
Dual 12" Drivers
SUBDD12 contains two 12" active drivers, a high-quality downward-facing and a powerful front-firing driver.
Modern Design
Inspired by one of the greatest periods of American industrial design, Deep Subwoofers are a subtle yet elegant addition to any sound system. Enjoy deep tones and rich sonic environments without an unsightly black box dominating your space
On Board controls
The onboard controls allow you to dial in the subwoofer to your unique living situations easily. The phase, volume, and crossover are all comfortably accessed with large knobs on the rear.
| Model Number | SUBDD12 |
| Part Number | SUBDD1200 |
| Active Woofer | Dual 12" Composite |
| Frequency Response | 17-180Hz |
| Low-Pass Filter | 50 -150Hz +/-3dB |
| Output Power | 600 Watts |
| Input | RCA/XLR/Speaker |
| Auto-On | 5mV |
| Cabinet Finish | Cloth Wrapped, Aluminum Top |
| Dimensions | 432 x 432 x 432mm |
| Weight | 28.5 Kg |
| DEEP SUB Data Sheet  |
DEEP SUB Install Manual  |
Crossover
Use this knob to set the highest bass frequency the subwoofer will play, from 50 to 150 Hz. If you’re using an AV receiver or surround-sound processor, set this knob at 150 and use the crossover built into the receiver or processor. If the subwoofer is installed in a stereo system, set this knob as close as possible to the lowest rated bass extension of the main left and right speakers.Phase
Use this knob to adjust the phase of the subwoofer relative to the main speakers. This will help achieve a smoother blend of the sound of the subwoofer and the main speakers. To adjust it, sit in the chair or couch where you usually listen, and play some bass-heavy music with the phase knob set to 0. Now play the same music with the knob set to 180. If you hear a difference, experiment with different settings until the bass sounds smoothest from your chair.Volume
This knob adjusts the subwoofer’s volume. Turn it clockwise for full volume. Note that the subwoofer level control in an AV receiver will also affect how loud the subwoofer plays. With most AV receivers, setting this knob at about halfway up (the 12 o’clock position) will provide a volume level that allows the subwoofer’s level to be matched with that of the main speakersAuto On/Off
This switch functions only when the power switch is set to “on.” When this switch and the power switch are both set to “on,” the subwoofer’s power will always be on. When this switch is set to “auto,” the subwoofer’s power will come on automatically when it senses an incoming audio signal. If there is no signal for 15-18 minutes, the subwoofer will automatically shut off.Subwoofer Connections
Connect the subwoofer to a receiver or preamp using an RCA interconnect cable, not included. The sub can either be connected to a dedicated LFE output or subwoofer output using a single mono cable or, by using a “Y” adapter, to a stereo, adjustable line level output. A fixed line level output is not appropriate as the subwoofer level will not change to follow the adjustments in system output level.| DEEP SUB Data Sheet |
DEEP SUB Install Manual |
