Ideal for single room commercial applications such as meeting rooms, classrooms, and lecture halls, the KX4 combines an in-wall touchpanel and hard button input with a built-in control processor. The result is an enhanced automation solution that combines control simplicity with power in a single cost-effective unit. For front panel control, the KX4 boasts a 4” high-resolution capacitive touch display with five configurable hard-buttons that can be customized with RTI’s Laser Shark engraving.

The built-in control processor features advanced capabilities, including support for two-way drivers, RTiPanel App and expansion configurations. Back panel connections enable direct control of devices via IR, IP and two RS-232, six voltage sense ports with sense-event capabilities, and four relays for control via contact closure.
 

Commercial Applications

The KX4 is a touch-panel and processor in one. This powerful unit is perfect in a classroom, lecture hall, huddle space, conference room or just about any setting where intuitive and cost-effective control is required. Since the KX4 can run two-way drivers via IP and RS-232 without any need for additional equipment, it can serve as an all-in-one interface and processor to control AV, climate, scene-based lighting and shades, security, and more. If additional control is required, expansion devices like the PCM-4 or ESC-2 can be easily implemented. If the project calls for additional user interfaces, the KX4 built-in ZigBee and Ethernet options allow the addition of a hand-held remote, countertop or in-wall touchpanels and even a mobile device running the RTiPanel app. These features make it an ideal candidate for an all-in-one solution in just about any commercial environment.
 

Residential Applications

While the KX4 can serve as the processor to facilitate media streaming, surveillance, lighting and more, the unit is ideally used as an expansion device to an XP processor in a residence. If installed in a remote location in the home, ZigBee based controllers can be utilised to communicate with the main XP control processor over the network. This makes it easy to provide a control solution in residences where creating a large ZigBee network is challenging. If there is local equipment, a KX4 can control devices directly or communicate with other expansion devices, such as the PCM-4, ESC-2, RCM-4, and other KX series keypads in the residence.
 

Doing Triple Duty

In large projects that require many intensive two-way IP drivers that may bog down an XP processor, a KX4 can even be used as an expansion device in processor mode to handle some of the burden. In this situation, drivers can be set to run on the KX4 instead of the XP processor. This solution is recommended for dealers who are utilising many resource-hogging drivers and are finding issues with latency and low memory.

 
  • Vivid 4” WVGA (480x800) capacitive touch screen, and five hard buttons provide an incredibly simple and intuitive control experience.
  • Built-in control processor features advanced capabilities including support for two-way drivers, RTiPanel App and expansion capabilities.
  • Control processor also enables direct control of devices via IR, IP and two RS-232, six voltage sense ports with sense-event capabilities, four relays for control via contact closure and an astronomical clock for time-based events.
  • Built-in 2.4GHz ZigBee® RF transceiver module and antenna enables wireless remote control support.
  • Integrated 10/100 Base-T Ethernet (with PoE) for access to network security cameras, programming updates and more.
  • Proximity sensor wakes up the unit as a user approaches and an ambient light sensor adjusts the touchpanel’s backlighting.
  • Powered using power supply, CB8 connecting block or PoE (Power over Ethernet).
  • Stylish low-profile faceplate available in white or black (ships with white).

 

* All Specifications subject to change without notice.

Power +9VDC to +16VDC, 1A max
Power Management Adjustable backlight brightness, Ambient light sensor, Proximity sensor
Touchscreen Display High-brightness colour TFT LCD
WVGA (480x800 pixels) with 16.7M colours
Integrated high-resolution capacitive touch screen
Display Size 4.0 in (97.2mm) diagonal
Display Backlight LED Backlit, 200nit
Infrared Output One, through control port, 200mA output
Drives up to 1000 ft (300 m) of wire
Serial Port Two RJ-45, RS-232 communication
Ethernet Port 10/100 Base-T with Power-over-Ethernet
Relays Four, 3 Amps @ 30 VDC
Sense Inputs Six, 3-24VDC
Radio Frequency Control Range Up to 100 feet (30.5 meters)
Communication with optional wireless Interfaces
Radio Frequency Carrier 802.15.4 @ 2.4GHz (Zigbee Wireless Networking)
Microphone Silicon MEMS
Speaker One (1) 2 Watt, 8 Ohm
Flash Memory 128MB Bytes Flash (non-volatile) memory
RAM Memory 256MB
Device Capability Total number of devices is limited only by memory
Macro Capability Unlimited steps in a single macro
Total number of macros is limited only by memory
Macro capability on every button
Communications USB programming port
Enclosure High-impact moulded ABS plastic
Mounting Integrated mounting wings, or screws through front plate
Bezel Dimensions (W x H) 4.352in (110.5mm) x 5.876in (149.25mm)
Installation Cut-Out (W x H) 2.942in (74.7mm) x 5.192in (131.8mm)
Total Depth in Wall 1.265in (32.1mm), with mounting wings 1.624in(41.2mm)
NOTE: Additional room may be required depending on connections
Weight 8.9 oz (252 g)
Operating Temperature 0°C to +50°C
Operating Humidity 5% to 95% Non-condensing
Warranty Three Years (Parts & Labor)

* All Specifications subject to change without notice.


 
KX4 Data Sheet


 
Power +9VDC to +16VDC, 1A max
Power Management Adjustable backlight brightness, Ambient light sensor, Proximity sensor
Touchscreen Display High-brightness colour TFT LCD
WVGA (480x800 pixels) with 16.7M colours
Integrated high-resolution capacitive touch screen
Display Size 4.0 in (97.2mm) diagonal
Display Backlight LED Backlit, 200nit
Infrared Output One, through control port, 200mA output
Drives up to 1000 ft (300 m) of wire
Serial Port Two RJ-45, RS-232 communication
Ethernet Port 10/100 Base-T with Power-over-Ethernet
Relays Four, 3 Amps @ 30 VDC
Sense Inputs Six, 3-24VDC
Radio Frequency Control Range Up to 100 feet (30.5 meters)
Communication with optional wireless Interfaces
Radio Frequency Carrier 802.15.4 @ 2.4GHz (Zigbee Wireless Networking)
Microphone Silicon MEMS
Speaker One (1) 2 Watt, 8 Ohm
Flash Memory 128MB Bytes Flash (non-volatile) memory
RAM Memory 256MB
Device Capability Total number of devices is limited only by memory
Macro Capability Unlimited steps in a single macro
Total number of macros is limited only by memory
Macro capability on every button
Communications USB programming port
Enclosure High-impact moulded ABS plastic
Mounting Integrated mounting wings, or screws through front plate
Bezel Dimensions (W x H) 4.352in (110.5mm) x 5.876in (149.25mm)
Installation Cut-Out (W x H) 2.942in (74.7mm) x 5.192in (131.8mm)
Total Depth in Wall 1.265in (32.1mm), with mounting wings 1.624in(41.2mm)
NOTE: Additional room may be required depending on connections
Weight 8.9 oz (252 g)
Operating Temperature 0°C to +50°C
Operating Humidity 5% to 95% Non-condensing
Warranty Three Years (Parts & Labor)

* All Specifications subject to change without notice.


 

Questions?

In order to assist us in reducing spam, please type the characters you see:

You may also like

KA8

KA8

KA11

KA11

KX2

KX2