IR Kit V2
Infrared Distribution Kit
IR KIT V2
Naked Cable, IR Systems, Blue Eye IR Systems, IR Systems
The Naked Cable IR Kit can receive signals from an infrared remote control and pass the signal through the Connecting Block, for distribution to up to 5 components. The IR Receiver can be mounted to any flat, clean surface (furniture recesses, under shelves, etc.) using double-sided adhesive tape. The emitter(s) mount on a suitable location on the component being controlled.
The IR KIT V2 includes:
• 1 x Hub with mounting hardware
• 1 x AU/NZ compliant power supply
• 1 x IR receiver (Red 3.5mm jack connector)
• 1 x 3.5mm - RJ45 Adapter (Use between IR receiver & data mechs)
• 3 x Single emitters (Yellow 3.5mm jack connector)
• 1 x Dual emitters (Yellow 3.5mm jack connector)
KEY FEATURES
- Excellent performance for the value
- IR Hub with mounting bracket
- Designed to control up to 12 components
- Can be daisy chained via RJ45 jack
- 3.5mm jack connections – Receiver can be extended as required
- Visual feedback on all components to confirm operation
- Designed to be resistant to all common forms of interference
- Compatible with majority new high-frequency devices 30 kHz – 55kHz
- NZ compliant high-quality power supply
- 3-Year Warranty
SPECIFICATIONS
- IR Hub WxDxH 90mm x 50mm x 20mm
- IR Receiver 14mm x 14mm
- IR Flasher 10mm x 10mm
- Power Supply – 12v, 500mA N1388
| IR KIT V2 Manual .jpg "340px-Datasheet logo Magnetica svg (small copy)"){kind=logo} |
HDMI Extender IR to Multiple Source Components  |
Sky Kaon Box Emitter location |
HUB-6 IR Receiver Pin-out |
| IR KIT V2 Manual |
HDMI Extender IR to Multiple Source Components |
Sky Kaon Box Emitter location |
HUB-6 IR Receiver Pin-out |
-221.1.1.jpg)
