C700 V2
BluOS Streaming Stereo Integrated Amplifier
C700 V2
NAD Electronics, Integrated Amplifiers, Streaming Amps, Integrated Amps
A Feast for the Senses
The C 700 V2 BluOS Streaming Amplifier makes music instantly accessible. Connect your speakers, then use the intuitive BluOS Controller app on your smartphone, tablet, PC, or Mac to select the music you want to hear.
Through its HybridDigital UcD output stage, the C 700 V2 can deliver 2×80 watts of continuous power and 2×120 watts of instantaneous power, for effortless reproduction of musical transients. NAD’s highly efficient HybridDigital UcD amplifier design is renowned for ultra-low noise and distortion through the entire audioband, regardless of the loudspeaker load. Combine that with an upgrade to the ESS Sabre ES9028 DAC, and the V2 promises a refined listening experience characterized by greater precision and depth, sure to delight audiophiles and music enthusiasts alike.
Thanks to its elegant, minimalist design and premium materials, the C 700 V2 will engage all your senses — not just hearing, but sight and touch as well. The amplifier is housed in a solid aluminum case, with a sleek front panel and 5″ high-definition colour screen that displays album art, track progress, and system settings.
Following menus on the C 700 V2’s screen, you can adjust amplifier settings with the control knob and navigation buttons on the front panel or the included BC1 IR remote control.
A Modern Classic
With built-in Ethernet and Wi-Fi, and a network streamer based on the rich, robust BluOS software platform, the C 700 V2 has everything you need to play music through your favourite speakers. Using the BluOS Controller app, you can cue up music from dozens of different streaming and Web radio services, or play music stored on an external drive connected to the C 700 V2’s USB port. New for V2 is a Moving Magnet phono stage, so you can connect your turntable without needing an external preamp.
Like all BluOS-enabled components, the C 700 V2 supports high-resolution audio to 24-bit/192kHz, and has full MQA decoding and rendering capability. With these features, you can enjoy lossless and high-resolution audio from services such as Amazon Music Ultra HD, Deezer, Qobuz, and Tidal.
The C 700 V2 supports Spotify Connect and Tidal Connect, so you can control playback from the apps for those services; and Apple AirPlay 2, so you can stream music from Apple devices and iTunes libraries. You can also cue up music by voice, using the Amazon Alexa or Apple Siri voice control protocols.
Well Connected
The C 700 V2 has a MM phono stage and stereo RCA analog inputs, as well as coaxial and optical digital inputs, for connecting disc players, game consoles, media adapters, and other components. There’s also an HDMI-eARC port for connecting an HDTV with HDMI-ARC support. This allows the C 700 V2’s volume setting to be adjusted from the TV’s remote.
In addition to the loudspeaker outputs, the C 700 V2 has a subwoofer output jack. Using the BluOS app, you can set low- and high-pass crossover settings, for a seamless blend between the subwoofer and main speakers, and add two addition BluOS speakers for a complete 4.1-channel Dolby surround sound system. And to take full advantage of its new Dolby surround-sound capability, the C 700 V2 supports Dirac Live room correction (requires a license and calibrated mic, both sold separately). The C 700 V2 can store up to five Dirac profiles for different sources or seating arrangements and room conditions.
The C 700 V2 also has two-way aptX HD Bluetooth, so you can listen to music through wireless headphones, and stream audio from any smart device.
The Legend Continues
There are many ways to enjoy the NAD C 700 V2 BluOS Streaming Amplifier. It can serve as the hub of a standalone music system; or function as part of a BluOS whole-home music system with as many as 63 additional zones, with full support for high-resolution audio. The C 700 V2 can also be combined with other AirPlay 2 components for whole-home music.
With the C 700 V2, you can play music from your favourite streaming services , your turntable, or your smart TV apps, or from a music library on a USB drive, through your loudspeakers; or you can listen through wireless headphones. The C 700 V2’s digital and analogue inputs will accommodate your legacy components.
Ever since NAD introduced the legendary 3020 integrated amplifier in 1978, the NAD brand has been renowned for value, performance, and innovation. With the C 700 V2 BluOS Streaming Amplifier, NAD has reinvented that tradition for the modern musical age.
Note: Not suitable as the ‘master’ unit in a BluOS wireless fixed theatre group. Please see here for a guide to building the ultimate wireless home theatre system, and here for more information on how to configure your theatre group in BluOS.
Features & Details
- HybridDigital UcD Amplifier
- Continuous Power: 80 Watts per channel into 8/4 ohms
- Instantaneous Power: 120 Watts per channel
- 5″ high-definition colour information display shows album art, track progress, and system settings
- Solid aluminum body and glass front panel
- Works with intuitive BluOS Controller app for Android, iOS, macOS, and Windows
- BluOS multi-room streaming to 63 zones
- High-resolution audio to 24-bit/192kHz
- MQA decoding and rendering
- Integrated support for dozens of streaming and Web radio services
- Lossless and high-resolution streaming from Amazon Music Ultra HD, Deezer, Idagio, Qobuz, and Tidal (check that your intended streaming services are available in your location)
- Support for Apple AirPlay 2, Spotify Connect and Tidal Connect
- Voice control via Amazon Alexa and Apple Siri
- Optical and coaxial digital inputs
- HDMI-eARC input
- USB Type A port for connecting an external drive
- Two pairs of line-level analogue inputs
- Subwoofer output, with filter settings controllable from BluOS app
- Wi-Fi and Gigabit Ethernet
- Two-way aptX HD Bluetooth
- 12V Trigger output
- IR remote sensor input
- Available drivers for Control4, Crestron, Elan, RTI, and other home-automation systems
*Dirac Live Ready feature will be available in early 2025
Specifications
All specs are measured according to IHF 202 CEA 490-AR-2008 standard. THD is measured using AP AUX 0025 passive filter and AES 17 active filter.
- Continuous output power into 8 ohms and 4 ohms
- >80W / 100W (ref. 20 Hz-20 kHz at rated THD+N, both channels driven)
- THD+N (20 Hz – 20 kHz) at rated power
- <0.04 % (250mW to 90W, 4 ohms)
- Signal-to-Noise Ratio
- >84 dB (A-weighted, 500 mV input, ref. 1 W out in 8 ohms)
- Clipping power
- >86 W (at 1 kHz 8 ohms 0.1 % THD)
>102 W (at 1 kHz 4 ohms 0.1 % THD)
- >86 W (at 1 kHz 8 ohms 0.1 % THD)
- IHF dynamic power
- 8 ohms: 100 W
4 ohms: 125 W
- 8 ohms: 100 W
- Damping factor
- >90 (ref. 8 ohms, 20Hz to 20kHz)
- Frequency response
- ±0.18 dB (20 Hz – 20 kHz)
- Tone controls
- Treble: ±6.0 dB at 20 kHz
Bass: ±6.0dB at 60 Hz
- Treble: ±6.0 dB at 20 kHz
- Channel separation
- >93 dB (1 kHz)
>72 dB (10 kHz)
- >93 dB (1 kHz)
- Input sensitivity (for 80 W in 8 ohms)
- Line In: 550 mV
Digital In: -12 %FS
- Line In: 550 mV
- Standby power
- >0.5W
Subwoofer Output
- Maximum output level
- 4.0 Vrms (ref 0.0032% THD+N 100 Hz)
- Signal-to-Noise ratio
- >106 dB (20 Hz-20 kHz, ref 1V out)
- THD+N
- >0.006 % (20 Hz-200 Hz, ref 1.964V)
- Output impedance
- 600 ohms
BluOS Audio
AUDIO
- Supported audio file formats
- Sampling rate
- up to 32 bit/192 kHz PCM
- Bit depths
- Bit depths 16 – 24
CONNECTIVITY
- 3rd Party integrations
- Airplay 2
- Network connectivity
- Gigabit Ethernet RJ45
- Wi-Fi 5
- USB
- 1 x Type-A port for connection to USB memory stick (FAT32 or NTFS formatted) and supported peripherals
- Bluetooth quality
- aptX HD
- Bluetooth connectivity
- Two-Way (Receive and Headphone modes)
USER INTERFACE
- Supported operating system*
- Music playback from network shares on the following desktop operating systems: Microsoft Windows XP, 2000, Vista, 7, 8 to current Windows Operating Systems and macOS versions
- Mobile Application
- Free BluOS Controller App available for download from the respective App stores of Apple iOS devices (iPad, iPhone and iPod), Android devices, Kindle Fire and Windows or macOS desktops
SUPPORTED SERVICES
- Supported Radio, Music Services, Integration and Digital Assistants
Dimensions and Weight
- Gross dimensions (W x H x D)**
- 218 x 96 x 266 mm
- Net Weight
- 4.8 kg
- Shipping weight
- 5.3 kg
* – Compatibility to latest versions is subject to future software update.
** – Gross dimension includes feet, extended front and rear panel terminals
| C700 V2 Data Sheet  |
C700 V2 Quick Start Guide |
Specifications
All specs are measured according to IHF 202 CEA 490-AR-2008 standard. THD is measured using AP AUX 0025 passive filter and AES 17 active filter.
- Continuous output power into 8 ohms and 4 ohms
- >80W / 100W (ref. 20 Hz-20 kHz at rated THD+N, both channels driven)
- THD+N (20 Hz – 20 kHz) at rated power
- <0.04 % (250mW to 90W, 4 ohms)
- Signal-to-Noise Ratio
- >84 dB (A-weighted, 500 mV input, ref. 1 W out in 8 ohms)
- Clipping power
- >86 W (at 1 kHz 8 ohms 0.1 % THD)
>102 W (at 1 kHz 4 ohms 0.1 % THD)
- >86 W (at 1 kHz 8 ohms 0.1 % THD)
- IHF dynamic power
- 8 ohms: 100 W
4 ohms: 125 W
- 8 ohms: 100 W
- Damping factor
- >90 (ref. 8 ohms, 20Hz to 20kHz)
- Frequency response
- ±0.18 dB (20 Hz – 20 kHz)
- Tone controls
- Treble: ±6.0 dB at 20 kHz
Bass: ±6.0dB at 60 Hz
- Treble: ±6.0 dB at 20 kHz
- Channel separation
- >93 dB (1 kHz)
>72 dB (10 kHz)
- >93 dB (1 kHz)
- Input sensitivity (for 80 W in 8 ohms)
- Line In: 550 mV
Digital In: -12 %FS
- Line In: 550 mV
- Standby power
- >0.5W
Subwoofer Output
- Maximum output level
- 4.0 Vrms (ref 0.0032% THD+N 100 Hz)
- Signal-to-Noise ratio
- >106 dB (20 Hz-20 kHz, ref 1V out)
- THD+N
- >0.006 % (20 Hz-200 Hz, ref 1.964V)
- Output impedance
- 600 ohms
BluOS Audio
AUDIO
- Supported audio file formats
- Sampling rate
- up to 32 bit/192 kHz PCM
- Bit depths
- Bit depths 16 – 24
CONNECTIVITY
- 3rd Party integrations
- Airplay 2
- Network connectivity
- Gigabit Ethernet RJ45
- Wi-Fi 5
- USB
- 1 x Type-A port for connection to USB memory stick (FAT32 or NTFS formatted) and supported peripherals
- Bluetooth quality
- aptX HD
- Bluetooth connectivity
- Two-Way (Receive and Headphone modes)
USER INTERFACE
- Supported operating system*
- Music playback from network shares on the following desktop operating systems: Microsoft Windows XP, 2000, Vista, 7, 8 to current Windows Operating Systems and macOS versions
- Mobile Application
- Free BluOS Controller App available for download from the respective App stores of Apple iOS devices (iPad, iPhone and iPod), Android devices, Kindle Fire and Windows or macOS desktops
SUPPORTED SERVICES
- Supported Radio, Music Services, Integration and Digital Assistants
Dimensions and Weight
- Gross dimensions (W x H x D)**
- 218 x 96 x 266 mm
- Net Weight
- 4.8 kg
- Shipping weight
- 5.3 kg
* – Compatibility to latest versions is subject to future software update.
** – Gross dimension includes feet, extended front and rear panel terminals
