View Favourites

News

Home / News / RTI New Commercial DSP Amps

RTI New Commercial DSP Amps

Meet the two all-new Commercial DSP Matrix Amps from RTI - with both lo-z and hi-z options!
New Product
Connected Media
Published on
RTI has just launched two new Commercial DSP Matrix Amps. These are an important addition to the RTI Audio family, complementing the recently introduced AD series with 100-Volt or 70-Volt output essential for commercial and outdoor audio installations.

 
AMP-4-125-Blog
 
AMP-4-125
4 Channel 4Ω/8Ω 125W, 2 Channel 70V/100V 250W
 
  • INPUTS: Four analog input channels (balanced or unbalanced) and one digital input (S/PDIF)
  • OUTPUTS: Two Hi-Z mono output zones, two Lo-Z stereo (or four Lo-Z mono output zones), or a mix of each
  • AMPLIFICATION: Class D Amplifier, 125 Watts per channel @ 4Ω/8Ω or 250W per channel @ 70V/100V 
  • DSP: Built-in DSP for fine-tuning acoustic characteristics for each zone
  • CONFIGURATION: Easy configuration via LAN or Wi-Fi
  • Control Options: IP and GPIO 
 

AMP-8-125-Blog
 
AMP-8-125
8 Channel 4Ω/8Ω 125W, 4 Channel 70V/100V 250W

  • INPUTS: Eight analog input channels (balanced or unbalanced) and one digital input (S/PDIF)
  • OUTPUTS: Four Hi-Z mono output zones, four Lo-Z stereo (or eight Lo-Z mono output zones), or a mix of each
  • AMPLIFICATION: Class D Amplifier, 125 Watts per channel @ 4Ω/8Ω or 250W per channel @ 70V/100V 
  • DSP: Built-in DSP for fine-tuning each zone
  • CONFIGURATION: Easy configuration via LAN or Wi-Fi
  • Control Options: IP and GPIO 
 

There has been significant interest in these new models - both domestically and overseas.

They are very well specified and reasonably priced to provide unparalleled bang-for-buck in the world of commercial amps.