ZigBee Enabled 2.4 GHz RF Transceiver Module
Utilizing the latest in wireless technology, the ZM-24 Transceiver Module is capable of more than just receiving signals - it can transmit signals as well. This creates a bi-directional communication link between Zigbee® enabled RTI control processors and handheld remote controls. Feedback, such as song meta-data or volume level from supported devices can now be viewed on the remote control.
The ZM-24 is easy to install, since only one module needs to be hard-wired to the control processor. Additional “repeater” modules can be added by simply powering them from any electrical outlet within communication range of other modules. The ZM-24 units will then create a self-healing “mesh” network which adapts to changes or problems with the communication path.
NOTE: A 2.4 GHz Zigbee® enabled remote control and processor must be used with this model of transceiver. It is not compatible with the 433MHz remote controls.
|Power Requirements||+9VDC to +16VDC @ 60mA|
|RTI COM Port||Two-way Zigbee® Communication Port, RJ45 Connection
Drives up to 1000 ft (300 m) of wire.
|Wireless Networking||IEEE802.15.4 Zigbee© network compliant|
|RF Carrier Frequency||2.4Ghz - 2.5Ghz|
|Operating Temperature||+32°F to +122°F
(0°C to +50°C)
|Operating Humidity||5% to 95% non-condensing|
|Device Capability||Total number of devices is limited only by memory|
|Communications||OTA (Over-the-air) Programmable|
|Enclosure||High-impact molded ABS plastic, black|
|Module Dimensions -
|3.5" x 7.5 " x 1.1"
(89mm x 184mm x 28mm)
|Weight||4.4 oz. (125 grams)|
* All specifications subject to change without notice.