NAD M10 - Masters Series Integrated Amplifier - BluOS Enabled
HybridDigital Amplification: The NAD Master Series M10 utilises HybridDigital amplification featuring the remarkable Hypex nCore amplification stage that offers state-of-the-art performance along with the ability to drive virtually any pair of loudspeakers. Conservatively rated at 100 watts per channel (into 8- or 4-ohm), the M10 is both highly efficient and remarkably powerful, with the ability to render even the subtlest musical details with lifelike realism. Effortless dynamics and a complete absence of electronic noise are hallmarks of this advanced technology.
32-Bit/384kHz ESS Sabre DAC: The NAD M10 BluOS Streaming Amplifier is equipped with a 32-bit/384kHz ESS Sabre DAC, one of the best performing DACs on the market today with its excellent dynamic range and incredibly low jitter spec. It offers support of high resolutions music files (including MQA, FLAC, WAV, and AIFF) up to 24-bit/192kHz.
Dirac Live Room Correction: The M10 employs Dirac Live Room Correction software that delivers optimised sound quality for your home theatre system. The built-in Lite version of the computer software (for Windows or Mac), with the option to upgrade to a full-featured version, measures the acoustic performance of the system within the listening room and optimises playback performance to provide the most transparent music reproduction possible. The setup process is automated and very simple, giving you the tools to precisely tune for the best results. With Dirac Live, you can build the perfect listening environment that corrects for both the timing and colourations in sound using the supplied microphone and its powerful computer software.
Tone Controls: The NAD M10 BluOS Streaming Amplifier offers adjustable Bass (20Hz) & Treble (20kHz) controls from -6 to +6dB.
Bridge Mode: M10 output power is doubled when set to Bridge Mode. This way, the M10 can be used as part of a high power stereo or home theatre system with additional power amplifiers (sold separately). In Bridge Mode, the M10 will produce approximately 200 watts into an 8-ohm loudspeaker. In this mode, the amplifier sections will react as though the speaker impedance has been halved. Low impedance speakers (under 8-ohms) are not recommended when using Bridge Mode as these may cause the amplifier's thermal cut-out to operate if played at high levels.
Note: Set the Bridge Mode switch to the "On" position. Then, connect the speaker to the rear-panel terminals of the M10 marked "Speaker Right+" and "Speaker Left+" ensuring that "Speaker Right+" is connected to the "Negative (-)" terminal of your speaker and "Speaker Left+ is connected to the speaker's "Positive (+)" terminal. Connect your playback source to the Left stereo RCA input sockets of the M10 only. Do not connect anything to the Right stereo RCA input socket when Bridge Mode is selected.
HDMI ARC: The Master Series M10 features a HDMI ARC jack for connection to your television, allowing you to listen to all of your TV's 2ch PCM sources through the NAD BluOS Streaming Amplifier. The HDMI ARC jack only supports 2ch PCM audio (not compatible with Dolby Digital or DTS); make sure your TV is set to output 2ch PCM.
Note: The HDMI ARC jack only supports audio transmission; video is not supported.
Optical & Coaxial Digital Input: The NAD Master Series M10 is equipped with one optical (toslink) digital input and one coaxial (RCA) digital input. These digital inputs will support 2ch PCM audio up to 24-bit/192kHz (not compatible with Dolby Digital/DTS).
Analog Line-Level Inputs: The NAD M10 offers two analog line-level inputs consisting of stereo RCA jacks. These two analog stereo RCA inputs can accommodate all kinds of analog line-level source components by offering ideal input impedance characteristics with linear ultra-low-noise buffer amplifiers to prevent any sonic degradation caused by inappropriate loading of the source device.
Note: The NAD M10 is not equipped with a Phono input. In order to connect a turntable, you will need an external phono preamp or turntable with a built-in phono preamp (all sold separately).
USB-A Port: The NAD M10 is equipped with a rear-panel USB-A port for connection of a USB mass storage class (MSC) device, such as a thumb-drive or external hard-drive (an external hard-drive will require separate AC power). The unit's USB-A port supports playback of a variety of compressed and high-resolution music files stored on a compatible USB MSC device formatted in FAT 32, NTFS, or Linux ext4. Your connected USB MSC device will appear as a local source within the BluOS app on your Apple iOS or Android OS device. Access and playback of music files stored on your connected USB MSC device will be done through the BluOS app.
Note: The USB-A port is not compatible with the direct connection of an Apple iOS or Android device. There is also a rear-panel miniUSB port that is used for service purposes only (not for consumer use). Only authorised service personnel can access this miniUSB port.
Bluetooth aptX HD: The NAD M10 features two-way wireless Bluetooth capability that is powered by aptX HD for the highest possible sound quality available. aptX HD supports 48kHz/24-bit LPCM audio over a Bluetooth wireless connection for a "better-than-CD" listening experience. The M10 can act as a Bluetooth Receiver or Bluetooth Transmitter (but not both at the same time). The Bluetooth Receiver and Transmitter modes are only accessible via the BluOS App. You can pair multiple devices with the BluOS Streaming DAC, but only one device can be connected and used at a time (the BluOS Controller app must be used for pairing). The NAD M10 has a Bluetooth wireless range of approximately 10m.
Receiver Mode: In Receiver mode, you can wirelessly stream stored music and music apps from your smartphones, tablets and laptops to the NAD M10. You can control basic playback functions (Play/Pause & Previous/Next Track) from the touchscreen, but your Bluetooth source device will have to be used for more advanced music navigation. The M10 does not display song/artist/album information. However, you can view song/artist information and album art from the BluOS app on your Apple iOS or Android device.
Transmitter (Headphone) Mode: In Transmitter mode, you can wirelessly stream analog & digital inputs of the M10 and BluOS network content to a set of Bluetooth enabled headphones (only one set of headphones can be connected at a time). Because the NAD M10 does not support Receiver & Transmitter mode simultaneously, you cannot listen to a Bluetooth audio streaming source on a set of Bluetooth headphones through the M10. There is no audio output from the M10's preamp or headphone outputs when the unit is wirelessly streaming to a set of Bluetooth headphones.
Note: Make sure the included Bluetooth antenna is installed on the rear-panel of the unit for wireless Bluetooth connectivity.
Heavy-Duty Binging Post Terminals: The Master Series M10 is equipped with heavy-duty binding-post speaker output terminals that will accept bare wire (up to 10AWG) or banana plugs (single only).
Stereo RCA Pre-Outs: The stereo RCA pre-outs lets you use the M10 as a high-performance pre-amplifier with a more powerful external amplifier (sold separately).
Dual Sub Outputs: The NAD M10 is equipped with two discrete mono-RCA sub outputs to connect up to two powered subwoofers. The subwoofer outputs have a built-in low pass crossover that can be adjusted in the BluOS app from 40-200Hz (80Hz default).
Wired or Wireless Network Connection: The NAD Master Series M10 can connect to your home network and Internet provider via a hardwired Gigabit Ethernet (RJ-45) jack connector or wireless WiFi (802.11 b/g/n) connection. Either network/internet connection allows you to stream music from internet radio, select online music services and stored music libraries on your network using BluOS.Note: Make sure the included WiFi antenna is installed on the rear-panel of the unit if you will be using a wireless WiFi network connection.
BluOS Wireless High-Resolution Multiroom Audio: The NAD M10 is part of the BluOS wireless high-resolution multiroom audio eco-system - consisting of powered speakers, soundbar speakers, amplifiers, players, and hard-drives. The BluOS wireless high-resolution multiroom audio ecosystem uses your home's wired or wireless network to connect multiple Bluesound products and play your music in perfect sync, or different music simultaneously, anywhere in your home. BluOS can wirelessly transmit lossless music up to 24-bit/192kHz at ultra-fast speeds with no lag and zero loss in sound quality.
Compatible Multiroom Audio Sources: The following audio sources can be used for multiroom audio playback - internet radio (including TuneIn & iHeart Radio); online music services (including Tidal, Spotify, Amazon, Deezer, Slacker, and Napster); Bluetooth & USB audio, music libraries (computers and NAS drives); and Aux inputs (analog or digital).
Number of BluOS Zones: Up to 16 Bluesound devices can be connected in a strictly wireless environment. Demonstrated practice has shown that you can create up to 8 groups of 8 Bluesound devices or 4 groups of 16 Bluesound devices. If you want to connect more than 16 Bluesound devices, you will need to connect the Bluesound devices to your network using a wired connection. BluOS can then control up to 64 devices in a strictly wired environment.
Note: Make sure the NAD M10 has the latest BluOS software and firmware update installed.
BluOS Controller App: The free BluOS Controller app (for Apple iOS 9.3-up, Android OS 4.1-up, Windows XP-up, and Mac OS X 10.7-up) turns your mobile device or computer into a full-featured wireless remote control for the NAD M10 and the BluOS wireless multiroom audio system. The BluOS Controller app on your compatible device uses your home's WiFi network to connect with Bluesound devices, so you can play all the music you love anywhere in your home for a wireless multiroom music experience. Get on-demand access to your music libraries on your home network, stream live Internet radio from almost any place in the world, or listen to one of the many music services available on Bluesound, all from the palm of your hand with the easy-to-use BluOS Controller app.
Multiroom Audio: Play a different song at the same time in different rooms, or group all your BluOS enabled devices together and listen to your favourite music in perfect sync throughout your home.
Now Playing Screen: Control your music and adjust the volume in any room, get rich album artwork and detailed artist info, right from the Now Playing screen. Even check what quality you are streaming at to ensure the best possible listening experience.
Individual Songs & Playlists: Tap a song and have it play instantly, or create and edit playlists on the fly by simply adding songs or entire albums to the play queue. Playlists can then be saved inside the app and listened to at any time.
Alexa Compatible: Using an Amazon Alexa enabled device (sold separately), you can use your voice to explore music services, select presets, adjust volume levels, switch up songs in different rooms, or even group your Bluesound components together and play your music in perfect sync throughout the house. Each Alexa voice command will need to start with the phrase "Alexa, ask Blue Voice to" or "Alexa, Tell Blue Voice to". Alexa Skills for BluOS will need to be setup through the Amazon Alexa app on your Apple iOS or Android device.
High Resolution Audio: High-resolution audio tracks are either 24-bit/96kHz or 24-bit/192kHz, and contain up to 6.5x more data than standard CDs, letting you hear all the detail of your favourite music in superior quality. With full support for hi-res audio, you can stream WAV, FLAC, ALAC, AIFF, WMA-Lossless, MQA music files over your home's WiFi network or directly from a connected USB mass storage class device. Bluesound also supports compressed music files such as MP3, AAC, WMA and OGG. Bluesound has been designed to work with today's larger music collections, and has indexed libraries up to 200,000 songs in demonstrated practice (this will depend on the music's metadata & artwork). Bluesound also offers gapless playback by default for all supported file music types.
Notes: Bluesound cannot index or play AAC files with the extension ".m4p". These files were purchased in iTunes prior to 2009 and are subject to copy protection. Apple Consumers with an iTunes Match subscription can delete and re-download these files free of charge from their iTunes Cloud
Master Quality Authenticated (MQA): The NAD M10 will playback and decodes MQA content from BluOS network audio sources. Master Quality Authenticated (MQA) is a revolutionary end-to-end technology built into the NAD M10 that captures and delivers master quality audio. The M10 includes a powerful decoder and audio renderer for the MQA system. This ensures that MQA-encoded audio files sound exactly like the source. MQA indicators are both shown on the front-panel display of the M10 and in the BluOS app on your compatible Apple iOS or Android OS device.
Online Music Services: Many popular music streaming services and internet radio apps are built right into BluOS, giving you an all-access pass to millions of songs and the freedom to listen to everything you want to hear. Using the BluOS Controller app, you can instantly discover and enjoy millions of songs from your existing music services, tune in to your favourite internet radio stations and podcasts from around the world, or access and listen to the music collections stored on your smartphone, tablet or laptop on any and Bluesound in your home. Subscription and purchase fees will apply to online music services.
Note: Availability of online music services may vary by region. Not all services may be available at time of purchase. Some services may be added or discontinued from time to time based on decisions of the music service providers or others.
Computer Audio: BluOS lets you easily connect and share your music collection from a computer or network-attached storage drive and access up to 200,000 tracks for wireless streaming. The BluOS wireless music system will pull music from an existing digital music library across the network on your Windows PC, Mac computer, or NAS drive using Windows or SMB File Sharing (SAMBA) and the BluOS Controller app for Windows (XP-up) & Mac (OS X 10.7-up). However, File Sharing is not enabled by default on Windows or Mac. You will have to manually alter these settings in your computer's menu system.
AirPlay 2: With AirPlay 2, you'll be able to stream just about any sound (including music, books, podcasts and more) from your iPhone, iPad, or Mac to the Bluesound system - all in sync. You can even watch movies and videos from Netlfix or YouTube on your Apple device while streaming the audio through to the Bluesound system.
AirPlay 2 also gives you more options for control, including using Siri voice assistance. If you are an Apple Music subscriber and add the M10 to the Apple Home App on your iPhone or iPad, you can use your iOS device or HomePod to say things like - "Hey Siri, play jazz in the Living Room" or "Hey Siri, turn up the volume in the Kitchen." You can even group Gen 2i Bluesound products with older Bluesound products in the BluOS App to add AirPlay 2 compatibility to your entire BluOS system.
High Resolution Touchscreen: The NAD Master Series M10 is equipped with an elegant, high-resolution TFT colour touchscreen display that allows simple operation directly from the front-panel without opening the BluOS controller app on your mobile device. M10 users can benefit from hands-free control of their music from any Amazon Alexa supported device or via Siri.
12V Trigger Out/IR In: The +12V Trigger Out lets you turn on/off another device along with the NAD M10. The IR IN is used to control the NAD M10 using an optional infrared repeater system (sold separately) or the IR output of another component. The 12V Trigger Out and IR In both consist of a female mono-minijack (3.5mm) terminal.
Custom Home Integration: The NAD M10 is fully compatible with today's leading smart home systems from companies such as Apple, Crestron, Control4, Lutron, and many others. This means that along with your lighting, shades, HVAC, and security, you can seamlessly control your BluOS multiroom music system from a common interface.
Auto Sense: The Auto Sense feature enables the M10 to wake up from standby mode when triggered by an active Network, Optical, Coaxial, or HDMI ARC source input. Auto Standby must be set to "On" for the Auto Sense feature to work.
|Watts RMS per Channel (8-ohms)||100|
|Watts RMS per Channel (6-ohms)||Not given|
|Watts RMS per Channel (4-ohms)||100|
|Minimum Impedance||4 ohms|
|Signal to Noise Ratio||>90dB|
Digital Music Features
|Built-in Digital to Analog Converter||Yes|
|High-resolution Audio Playback||WMA-Lossless, FLAC, ALAC, MQA|
|Bluetooth||Two-way Bluetooth 4.0 aptX HD|
|Total Analog Inputs||2|
|Optical Digital Inputs||1|
|Coaxial Digital Inputs||1|